A complete computer tune-up, including adware, virus, and trojan removal, and PC upgrades will cost you about $150, according to a report on Home Guide. Computers play a critical role in boosting your productivity regardless of your area of expertise. However, if you rely on computers to complete day-to-day tasks, you’re bound to face technical problems every day. Fortunately, there are ways you can quickly troubleshoot computer issues, especially those linked to hardware malfunction. From setting up a wireless printer to your PC to fixing a dysfunctional USB port, here are 3 common computer hardware problems and ways to fix them. 

Loud Noises From PC

A noisy computer indicates there is some form of hardware malfunction. In most cases, loud grinding and clicking sounds produced by computers are linked to hard disk drive problems. Since hard drives have a short lifespan, loud noises are a sign of failure. Therefore, replace your hard drive before it crashes. Technical issues with the cooling fan could also be the cause of loud, irritating sounds in your PC. If so, clean the computer using a can of compressed air. It’s important to note that there are other reasons why your computer is making loud noises. It could be the DVD drive, speakers, or dial-up modem making the clicking sounds. So, be sure to inspect your computer thoroughly before replacing the cooling fans and hard drive.   

Printer Not Printing

Regardless of the make, your printer might stop working unexpectedly due to various reasons connected to hardware or software issues. Luckily, there are several ways you can troubleshoot your printer and resolve the problem. First, you need to figure out what the problem is by checking the printer’s error lights. The warning lights will let you know if there is a paper jam or little ink in the toner or cartridge. 

Once you’ve identified the issue, ensure there is ink in the cartridge and paper in the tray. Check if the USB cable is plugged in and cancel the printing queue. Then restart your printer to reduce overload. Restarting the printer will also ensure your new toners or ink cartridges are correctly installed. You might also want to check your PC to determine if there’s any problem with the printer’s drivers. Remember each printer, be it an Inkjet printer, laser, 3D, or Dot Matrix printer, has unique drivers. So, use the troubleshooting mode to ensure the drivers are up-to-date and functioning as required. 

System Restarts Automatically 

Malware infection, malfunctioning hardware, and corrupted drivers are key reasons your PC restarts automatically. Your computer might also reboot continuously after a Windows Update, but it’s difficult to pinpoint the exact cause of this problem. To solve these problems, update drivers, scan for malware and viruses, and delete bad registry files. For this, it is essential that you install an effective malware scanner to help you conduct a deep scan and fix recurring malware and virus issues. Also, check RAM, hard drive, and other hardware for issues.  

Computer problems can occur anytime, leading to low efficiency and productivity. But that doesn’t mean you should spend tons of money on computer repair service and replacements. If your PC starts making loud noises, restarts automatically, or makes a beeping sound, take time to understand the cause and how to fix the problem.